- #AUTODESK FUSION 360 CHANGE UNITS INSTALL#
- #AUTODESK FUSION 360 CHANGE UNITS UPDATE#
- #AUTODESK FUSION 360 CHANGE UNITS SOFTWARE#
- #AUTODESK FUSION 360 CHANGE UNITS MAC#
Set your unit type by clicking on the abbreviation in the bottom-right of the screen.Top Tips for working with SolidWorks units
#AUTODESK FUSION 360 CHANGE UNITS UPDATE#
Using this method you can create complex sketches that automatically update once a base value is changed, saving lots of time, and avoiding any potential adjustment errors. We can now follow this linked unit by ‘*2’ to give a new dimension that is always double the length of the first one – even if the first unit changes. The second value can then be linked to the first one by typing ‘=’ into the Smart Dimension value, then clicking on the first unit. First set one value – such as the length. For example – if we require a rectangle that is always twice as high as it is long we can connect these two values. This can allow you to easily make complex mathematical changes quickly and with confidence, and without leaving SolidWorks.įinally dimensions can also be linked to other units within sketches. Other symbols such as plus, minus and divide (+ – /) can also be used, or a mixture of these. Instead of grabbing a calculator you can simply type, 37.5 * 3 and SolidWorks will work out the correct number for you. Imagine you have a bar that is 37.5mm and you need to make it three times larger. This may sound complicated but it can really simplify your work and save lots of time.
Using mathematical symbols to change dimensionsĪnother great feature of Smart Dimensions is that you can use mathematical symbols to change your dimensions. Just by inputting ’7/16IN’ the rather cryptic Imperial amount converts to a much more understandable 0.44” or 11.11mm. This trick can be especially helpful for Metric engineers who aren’t used to fractions of inches. The fractions will then be converted directly into decimal, so 1/2 becomes 0.5 and 1/4 becomes 0.25. For example for a half type ’1/2’, for a third type ’1/3’ and so on. Simply type the fraction using the forward slash key. It’s even possible to mix units – so typing, “1 ft 3cm” will convert to 334.8mm or 13.18 inches!Īs well as writing whole numbers you can also input fractions. When using metric it’s possible to use Centimetres or Metres (cm or m) and these will convert down to millimetres. For example when working in inches, typing “1ft” will automatically convert to 12inches – or one foot. Within your own unit system you can also use larger unit types. Similarly, you can do the same if working in Metric simply by adding “in” (for inches) or ” (the symbol for inches) after your number. So you could input, 10, followed by “mm” and this will automatically change to 0.393 inches. This will then be converted to the equivalent length in inches. For instance if you’re working in Imperial you can use the Smart Dimension Tool to set dimensions in millimetres just by typing “mm” after the number value. One brilliant feature of SolidWorks is that you can use any unit type on the fly, even if your document isn’t set to that unit type. You can click ‘Edit document units to access more unusual unit types, if needed. For instance a length that is set to 1 inch will be converted to 25.4mm – a different number but physically exactly the same distance!
Any existing units in the model will automatically be converted into the new units, but the actual dimensions themselves will be unchanged. You can change the unit type at any time by simply clicking on the abbreviation and selecting your preferred system. This is likely to be either MMGS – millimetres, grams, seconds, or IPS – inches, pounds, seconds. You should see a collection of letters that indicates which units you’re currently using.
#AUTODESK FUSION 360 CHANGE UNITS INSTALL#
When you freshly install it, it's set to mm.How to tell which unit system you’re using in SolidWorksĪs soon as you start any SolidWorks document – whether it’s a part, assembly or drawing – you can instantly check your units system by looking to the bottom right of the screen. That all being said, if you go into Preferences for Fusion 360, you can set it to use inches or mm under the "Default Units" section. If S3D comes across a model that is really small, like 4 units wide, it assumes it's supposed to be inches and asks if you want to scale it up by 25.4.
#AUTODESK FUSION 360 CHANGE UNITS SOFTWARE#
STL files themselves have no units - the scale is arbitrary, it's just a bunch of numbers - so a model could be defined as "24 units wide", but it's up to the slicing software to determine if that's 24 inches or 24mm. There's no way to change that to go the other direction if a model is too big it will just warn you that it doesn't fit on the bed.
#AUTODESK FUSION 360 CHANGE UNITS MAC#
Not sure about the Windows version, but the Mac version of S3D assumes your model is in mm, and will ask to scale it up if it's too small. This is the opposite behavior of what you would expect if you were modeling in inches instead of mm.
0 kommentar(er)
